farrisgoldstein Posted November 22, 2015 Share Posted November 22, 2015 This head sat in my closet for a couple years. Just dragged it out to try to use it, and all the amp models except metal and insane are now far too quiet to use. On the Clean model, I have to put the master volume around 3 o'clock to be usable, which of course means I can't then switch to a dirty model without risking a ripped cone and a courtesy call from the cops.Any idea what could be causing this? I've tried several different speaker cabinets no difference. It even does it through the headphone jack, though it isn't quite as much of a volume drop through the headphone jack. If it's a bad part on the board, I could probably replace it, just not sure where to start with testing. Quote Link to comment Share on other sites More sharing options...
farrisgoldstein Posted November 23, 2015 Author Share Posted November 23, 2015 After some more testing, here's another weird observation: I might be crazy, but it's almost as if the AMP MODELS knob has somehow gotten shorted to a volume/gain pot lead. The clean-red is the quietest (nearly silent) setting and it gets progressively louder as you turn to the right, with the insane-green setting being the loudest. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.