JakeJaeger121 Posted May 12, 2016 Share Posted May 12, 2016 Hello all sorry this is probably answered 100 times but i checked out all answers but no fix anyone? When i got Line ux 2 and set it up installed and all plugged my mic into it AT2035 it worked picked up my mic and voice i can record now strangely after a few months now it decided it not to pick up my mic at all?? i tryed looking everywhere on google and here on support found several fixes but none work??? my mic doesnt pick up at all. Also i already authorized my UX2 now it saying it isnt and when i try to authorize it i get error code 80000002 invalid parameter? help Please! Quote Link to comment Share on other sites More sharing options...
BillBee Posted May 12, 2016 Share Posted May 12, 2016 Hey Man, First: Try a different USB port - L6 stuff hates usb hubs. Then a different usb cable - they do go bad. Then, Uninstall everything. Reinstall the latest version of Monkey. Go through the driver install and make sure all is green ticked = good. Open PF make sure UX2 is authorized for PF2 not PF1. UX2 => phantom power button in for condenser mic. Turn gain knob on unit up. Fire up PF and make sure mic is selected. Note: button off then plug mic in. Button off again prior to removing mic. The are some other settings in the PC too but hopefully the above will fix it. That "may" solve it. I "think" the giant 8000000000000002 code has to do with a communication error between the UX and the PC. Either Unit, Cable or Driver. I know, I know... Bill :D Quote Link to comment Share on other sites More sharing options...
fatfut Posted February 14, 2021 Share Posted February 14, 2021 On 5/12/2016 at 10:21 PM, BillBee said: Hey Man, First: Try a different USB port - L6 stuff hates usb hubs. Then a different usb cable - they do go bad. Then, Uninstall everything. Reinstall the latest version of Monkey. Go through the driver install and make sure all is green ticked = good. Open PF make sure UX2 is authorized for PF2 not PF1. UX2 => phantom power button in for condenser mic. Turn gain knob on unit up. Fire up PF and make sure mic is selected. Note: button off then plug mic in. Button off again prior to removing mic. The are some other settings in the PC too but hopefully the above will fix it. That "may" solve it. I "think" the giant 8000000000000002 code has to do with a communication error between the UX and the PC. Either Unit, Cable or Driver. I know, I know... Bill :D not working for me :'( pls help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.