Ronco46 Posted August 17, 2013 Share Posted August 17, 2013 Hello everyone! I read somewhere in this forum that DT Amps don't have a CD/mp3 input. That's right! But... since FX Loop Return is an analog input directly to DT power amp, I can connect a CD/mp3 player jack right there (if I don't need it for the 4 cable method) and i t works fine for jamming along a backingtrack (I've done it). Very important question: Am I damaging anything in DT amp? Thank you for your time. Miguel Quote Link to comment Share on other sites More sharing options...
Crusty_Old_Rocker Posted August 17, 2013 Share Posted August 17, 2013 You should be fine if using line level. Headphone output would be too hot especially if the volume is set high. Cheers, Crusty Quote Link to comment Share on other sites More sharing options...
Ronco46 Posted August 17, 2013 Author Share Posted August 17, 2013 You should be fine if using line level. Headphone output would be too hot especially if the volume is set high. Cheers, Crusty Ok, so if I have the CD player allways set with low volume I should be fine? How about if I plug it into POD HD CD input and then connect left unbalanced output to DT amp FX Loop Return... Does it give me some kind of extra protection? Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.