Thrash8315 Posted June 23, 2016 Share Posted June 23, 2016 Hi everyone, I have just bought the Relay G10 and connected it to my Firehawk FX. The transmitter shows a good connection (green light), but I get no sound. I troubleshooted by connecting the G10 directly to my amp and that works. I also connected my guitar directly into the Firehawk FX. That works. I have previously connected a Relay G30 into my Firehawk with great success. Was wondering if anyone here has any suggestions. Thank you. Quote Link to comment Share on other sites More sharing options...
DarrellM5 Posted June 23, 2016 Share Posted June 23, 2016 You're going from the 1/4" out of the G10 to the normal guitar input of your Firehawk, right? Were you using the same cable for all of your troubleshooting? You verified that the G10 works and that your guitar and Firehawk work so I'd check the cable. Quote Link to comment Share on other sites More sharing options...
Thrash8315 Posted July 1, 2016 Author Share Posted July 1, 2016 Thanks, Darrell, I opened up and rearranged the connection on my output jack on my guitar. For some reason, the ESP LTD that I use does not follow the EMG installation instructions. Problem solved. Began rocking out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.