GaryT898 Posted July 14, 2016 Share Posted July 14, 2016 So I just posed a topic and probably should have given some more information. I have several other guitars that I have tried it in and it works fine. My RRMG has EMG 57/66s in it (active pickups) The light blinks green on and off when plugged into my RRMG but no sound comes out. Any one else have this issue and how did you fix it? Quote Link to comment Share on other sites More sharing options...
DarrellM5 Posted July 14, 2016 Share Posted July 14, 2016 Yep, it's most likely that it was reverse wired and there are 2 solutions. The fastest way to get up and running is to use a mono to mono adapter between your guitar's output jack and the G10. The best solution is to reverse the ground wires on the guitar's output jack. There are 3 places on the jack for the wires to connect. 2 of them are grounds (audio ground and battery ground) and one is for the audio signal. I swapped the 2 grounds and it fixed my problem. My guitar was an Ibanez RGIR27FE 7-string with active EMG's. Swapping the grounds won't affect the guitar at all. It took me about 5 minutes to correct. This link has more info. http://line6.com/support/page/kb/_/live-sound/relay-digital-wireless/relay-g10-guitar-compatibility-fitelectronics-r817 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.