boded Posted March 26, 2017 Share Posted March 26, 2017 I cannot get the TBP12 transmitter to connect to the Spider V 60 amp. I changed the Global setting for wireless to manual, have both amp and TBP12 set to channel 1, but no sound. Wireless RX says v.1.0.0.0 - not adjustable Any ideas? Quote Link to comment Share on other sites More sharing options...
pber2025 Posted March 26, 2017 Share Posted March 26, 2017 I believe the amp only works with the G10T transmitter. Quote Link to comment Share on other sites More sharing options...
Guest Dan Bode Posted March 26, 2017 Share Posted March 26, 2017 I bought it because Line 6 states that it works with all generation 2 transmitters Quote Link to comment Share on other sites More sharing options...
pber2025 Posted March 26, 2017 Share Posted March 26, 2017 I re-read the specs from Line6 FAQ page for the Spider V and I believe you are correct. http://line6.com/support/page/kb/_/amplifiers/spider-v/spider-v-3060120240240hc-faq-r834 Looks like you need the latest firmware on the transmitter and you can select the channel from the global settings on the amp. Quote Link to comment Share on other sites More sharing options...
boded Posted March 26, 2017 Author Share Posted March 26, 2017 I was able to connect. I scrolled through all the channels 1-14(! there were 12 before?) then it worked o channel 1. The G50 may have been competing. It was still plugged in to another system in the room. Quote Link to comment Share on other sites More sharing options...
boded Posted March 27, 2017 Author Share Posted March 27, 2017 It does turn out that the G50 no longer works, though. Will look at how to update G50 receiver. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.