wpmcconnell Posted May 2, 2017 Share Posted May 2, 2017 Is the following possible? (1) Connect send 1 and return 1 with a patch cable. (2) Create the following chain: return 1 -> delay -> reverb -> send 1 (3) use the various level/mix/dry thru controls on the return 1 and send 1 blocks as a feedback loop that takes the reverb block and feeds it back into the input of the delay block My experiments with just a delay where the feedback in the delay block was set to zero allowed me to get a little more than one repeat, but not nearly what I was expecting with the settings I was using. I got some other random noises that didn't make much sense, and while tweaking accidentally came close to blowing out my ear drums :) Would love either some guidance from someone that's done this before I explore some more or an affirmative "yeah, don't try that" if I should just stop. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.