Riki1 Posted July 12, 2017 Share Posted July 12, 2017 I'm going through all my presets that have just effects going into my fender tube Amp. I want my Amp to be onstage monitor only and have modelled amps and cabs going out the xlr to the P.A I want to do this for an upcoming gig for 2 or 3 songs to hear what it sounds like . So should I... 1. Add Amp and cab onto Path A and have the normal path going out 1/4 inch to the Amp and the Amp+cab splitting off from the effects down to a separate xlr output (which I've done) was confusing and fiddly to get it right but it works all from the top Path going out of 1A to just Amp and 1B going to just xlr Or 2. Copy and paste all effects onto path 2 but add In amps and cabs and go out to xlr only. Hope that makes sense... I have the global EQ set to XLR only with some high and low cuts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.