donrock1 Posted August 13, 2017 Share Posted August 13, 2017 Hello! As title says, I need to send exact voltage values from CV out - I want to program it so that a footswitch switches between exactly 1V and exactly 3V. I need this for a modular synth that accepts pitch CV, and tracks 1V/octave. The problem is, the command center only lists values from 0 to 100. As I understand, the CV-out puts out voltages from 0-5V. Would this mean that I can set it to switch between values 20 and 60 and I will get the exact voltages I want (1V and 3V)? Thanks! Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted August 14, 2017 Share Posted August 14, 2017 If the CV out is 0-5VDC, then your scaling to 20-60 is correct. I looked all through the manual and did not find where the CV is 0-5VDC though. I could have missed it. Quote Link to comment Share on other sites More sharing options...
donrock1 Posted August 14, 2017 Author Share Posted August 14, 2017 If the CV out is 0-5VDC, then your scaling to 20-60 is correct. I looked all through the manual and did not find where the CV is 0-5VDC though. I could have missed it. Thanks for replying! I found that info here: http://line6.com/support/topic/16513-allow-cv-output-to-double-as-a-2nd-ext-amp-controller/ Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted August 15, 2017 Share Posted August 15, 2017 Awesome, good to know! Quote Link to comment Share on other sites More sharing options...
donrock1 Posted August 19, 2017 Author Share Posted August 19, 2017 I guess the only way to really find out would be to connect a voltmeter to a jack and measure the values. I don't have access to one, but if I manage to borrow one, I'll post the results. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.