bloozeman2002 Posted February 18, 2018 Share Posted February 18, 2018 Hey guys. New here... I'm trying to use the HX as a command center to utilize the midi switching on my Mesa Triple Crown. The instructions have me baffled. No step by step. This is my first midi adventure. I have the amp set to midi channel 1. I did the internal midi channel 1. I just can't seem to get it to send a midi message to the amp. Any help would be greatly appreciated.. Quote Link to comment Share on other sites More sharing options...
rbmackstaller Posted February 25, 2018 Share Posted February 25, 2018 Hey Bloozeman, I'm happy to try to walk you though as I've set up my HX for MIDI amp switching. First off, set your amp to a different MIDI channel than "1." Any channel number is fine but to make life simple, set it to "2." Now, any MIDI messages the HX sends out on channel 2 will be received by your amp. Before we get to that stage, there are basically two ways to integrate MIDI functionality: 1) Assigning a footswitch(es) to toggle channels, reverb, etc. or 2) Creating a setting on the amp (ie: Clean channel, Reverb on, Solo boost off) which loads when you select a preset on the HX. Which scenario are you hoping to achieve? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.