Frankenkeim Posted July 16, 2018 Share Posted July 16, 2018 Aloha - I was wondering if anybody is running the Korg minilogue directly into the Helix, and is using the Helix as an audio AND midi interface into your DAW (Reaper). When I connect the minilogue via USB directly to my computer, and run the minilogue's audio into the Helix everything is working fine. However, if I run the minilogue's midi and audio into the Helix I am experiencing issues. It's best explained with the video below by Kenny Gioia. I am following all steps exactly as explained - again, via USB it's working fine. The USB cable I have is very noisy, and I would like to use MIDI cables instead. When I connect the minilogue Midi In/Out with the Helix Out/In, I am experiencing the following: 1) The setup around timestamp 2:50 - 3:10 in the video below does produce a constant midi feedback loop that renders it unusable. I can fix it by changing the routing temporarily to another midi channel, and change it back to the correct midi channel when I am ready to print the audio. This issue does not exist using USB. 2) I am experiencing random crashes of HX Edit (error: "unit was disconnected"). The actual floor unit does not crash and I can still run audio for a guitar and the keyboard through it. However, the HX Edit crash does cause the midi data transfer to stop (audio continues). I need to restart the floor unit and HX edit to fix this issue Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.