Invalid Death Code 1

[welcome321]

So I decided to download the line 6 monkey app and update my foot-pedal and as i went to update the flash memory my foot-pedal said to turn the power on and then off. When i did this i got "Invalid Code Error 1" now the USB wont connect to the program on my computer, I've tried to restart the foot-pedal by multiple diffferent methods and nothing is working. I don't ever want to use the software again, but i need to get this pedal board off this Invalid Code screen or it is completely useless. Someone please help. 

[daveny5]

From the Line6 website: 

PODxt Family Error Codes

 

If you are experiencing the following error codes in the display of your PODxt device:

 

Invalid Error Code 01
Invalid Error Code 02
Invalid Error Code 03
Invalid Error Code 04
Invalid Error Code 05
Invalid Error Code 06

 

please try the following:

 

Try the Edit Buffer Initialization with the following steps:

 

1. Turn off the POD
2. Turn on the POD while holding down the Save and Edit buttons simultaneously
3. The POD's LCD screen should display Init Edit Buffer
4. Push the Output mode button
5. Turn the Select / Select Page knob one click to the right
6. Turn the Effect Tweak / Change Value knob to the left or right adjusting the contrast.

 

If that does not help, please try re-installing the flash memory on the PODxt device using the instructions in the following link:

 

Pod xt Series: Factory Reset, Reflash, and Firmware Updates

 

If this does not solve the issue for you please locate your local Service Center for repair.