Dansonsteel Posted November 1, 2019 Share Posted November 1, 2019 The G10 was plugged into the guitar while it was placed in the case and broke the plug from the transmitter case. The wires were ripped from the PCB on the back side of the plug. Does anyone know the functions of the colored wires? The PCB is marked with RTS but I can't tell what the wires functions are on the board. They go to never never land! I can repair it if I knew where the wires belong! 1 Quote Link to comment Share on other sites More sharing options...
Nick-Arg Posted February 6, 2022 Share Posted February 6, 2022 The RED goes to your T The BLACK goes to the big lug of the metal "switch" full of soldering The GREEN goes to the one above the R The BLUE goes to the one labeled Pin Hope you can get it working back again, I'm fixing mine right now. I was thinking on doing an iFixit page of it cause i couldn't find anywhere on the internet for a guide on how to repair the remote Quote Link to comment Share on other sites More sharing options...
Tnix Posted November 8, 2022 Share Posted November 8, 2022 I have four broken G10 relays I think that maybe this cheap plastic housing on the outside should be replaced with something metal possibly Quote Link to comment Share on other sites More sharing options...
orsonbean Posted March 22 Share Posted March 22 Sirs: I have acquired a G10 relay with the wires disconnected in the Remote Sender. Does any one have a picture of where all of the wires go on the circuit board and how the battery gets charged? Thanks in advance for your help on this! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.