Expression pedal inaccurate

[Hillman1312]

Dear forum,

 

I've always felt the expression pedal on my LT a bit stiff, but didn't want to loosen the screw too much as that would result in the pedal moving to "wobbly" (sorry, hope you understand what I mean). Lately I noticed that the expression % (for whatever model) tends to move rather quickly even though physical pedal position didn't move that much at all. I also notice some difference in the resistance depending on the pedal position. 

 

So today I had a closer look and noted that the adjustment screw that you can see on the side of the pedal actually does not stay concentrical with the hole which it is positioned. Probably there's something wrong with the internal mechanics of the pedal, but I don't want to open the device just yet (I need to check if I'm still under guarantee).

 

Anyway, my question is whether this is a typical problem for the LT and it is seen more often; also wondering if there's an easy fix for it?

I love the device, but as I do need to pedal from time to time I want it to be reliable and reasonably accurate.... I don't want things to get even worse.

I'm attaching some pictures to show the " offset"  of the adjustment screw depending on the pedal position. Maybe not very clear, but hopefully of some help to whomever reads this post.

 

Thanks again !!

Here the screw is a bit more to the right compared to the position in the picture below

 

 

 

 

 

 

[maxisanti]

Same issue here, any solution? The hole of the plastic cover is about to break.