jadams007 Posted January 11, 2021 Share Posted January 11, 2021 I'm having issues getting my Mission expression pedals to work properly. I have the pedal plugged into the HX Stomp at the EXP jack. When setting a Volume block to use EXP1 as the controller, the value for the "position" rises as I sweep the pedal down. When the physical pedal reaches 50%, the HX Stomp sees this as 100%. Moving the pedal further, the value for "position" starts to lower until it reaches 0%. I have tried two different Mission Expression pedals with the same result. I have tried multiple presets and multiple different blocks. Somehow I have to configure the HX stomp to understand what a full sweep is for the expression pedal. I have not found that in any manual. How do you program your pedal with the HX Stomp? Quote Link to comment Share on other sites More sharing options...
lou-kash Posted January 11, 2021 Share Posted January 11, 2021 44 minutes ago, jadams007 said: I have not found that in any manual. HX Stomp 3.0 Owner's Manual - Rev C - English.pdf, page 52 Quote Link to comment Share on other sites More sharing options...
jadams007 Posted January 11, 2021 Author Share Posted January 11, 2021 I have read the manual, but I don't see anything about how to calibrate the throw of the pedal. Not all Volume/Expression pedals have the same potentiometers and I don't see how to update the HX Stomp how much throw or to tell it when my pedal is 100% and when it's 0%. Quote Link to comment Share on other sites More sharing options...
jadams007 Posted January 12, 2021 Author Share Posted January 12, 2021 4 hours ago, lou-kash said: HX Stomp 3.0 Owner's Manual - Rev C - English.pdf, page 52 Found out my expression pedal is not compatible. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.