Jurld Posted March 8, 2014 Share Posted March 8, 2014 Most of my patches are clipping horribly on the digital input of my mBox Pro. It is patch related, as an empty patch seems to have reasonable levels. Unfortunately, the levels on an empty patch are too low when sent via the 1/4" outs to the line inputs on my Roland JC-120. There is a way to turn UP the SPDIF out on the Pod, but no way to turn it down, LOL. Any way to work around this short of re-doing all my patches and hoping I can strike a decent balance with the JC-120? 1 Quote Link to comment Share on other sites More sharing options...
bjnette Posted March 9, 2014 Share Posted March 9, 2014 On the Mbox pro check the driver menu/mixer and ensure the input is selected for +4db. or pro rather than consumer. This would seem the most likely cause. If not, then you'll have to lower the outputs on each patches mixer setting. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.