tobiashaupt Posted October 14, 2022 Share Posted October 14, 2022 A problem with my Catalyst 60: The tap delay setting gets out of sync with the real (perceived) delay time. When I set the delay time by tapping on the tap delay button, the led flashes in the correct interval but the real delay has a much higher delay time. Say I tap a speed of 500ms, the delay will be something arround 4 seconds. Resetting the Catalyst to factory settings will fix this problem for a short period of time but something messes it up later again. Setting the tap-delay via app does not fix the wrong delay either. Firmware is up to date (1.02.0) Anybody experiencing the same bug? Quote Link to comment Share on other sites More sharing options...
chrissnake Posted July 9 Share Posted July 9 I had the same problem so I did the factory reset (you must hold both Channel B and Manual buttons while turning on the amp) and the Tap tempo works in sync again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.