mkopec Posted November 4, 2022 Share Posted November 4, 2022 Followed the instructions to the T. No matter what I try, this "Boot Failure, Entered Update Mode" error persists. Quote Link to comment Share on other sites More sharing options...
dirtymcnasty87 Posted November 4, 2022 Share Posted November 4, 2022 Slightly different issue on my end... but a similar path forward may fix your issue. My update straight failed and wouldn't allow my Stomp XL to connect via any USB to any of my PCs, and it was hung on load screen. My assumption is that the initial PC I used has some USB 3.0 conflicts and goofed the update connection. So I used my laptop without any other usb connections - restarted it, entered update mode on the XL, used Line 6 Updater to directly push 3.5 (not via HX Edit), and the update took. Hope that helps, good luck. Quote Link to comment Share on other sites More sharing options...
manix1979 Posted November 4, 2022 Share Posted November 4, 2022 Reading the release notes would help. I had the same problem. HXEdit did not accept the Helix anymore. Download the Line6 updater and your're finished with updating very easy and fast. ;-) 1 Quote Link to comment Share on other sites More sharing options...
Tetradude Posted November 4, 2022 Share Posted November 4, 2022 Manix1979 - NAILED IT! Thank you \ ,, / Quote Link to comment Share on other sites More sharing options...
ejsBB Posted November 4, 2022 Share Posted November 4, 2022 Had the same problem downloading from the Line6 updater. Unplug usb, power down and do everything again. Magic!!! No more 3.50 Boot Failure, Entered Update Mode!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.