luthierwnc Posted December 1, 2022 Share Posted December 1, 2022 Hi All, I'm promoting my HX Effects from cab-miked ambience to its own pedalboard. In looking at pictures from other members I occasionally notice graphic (or even parametric) EQs. I was thinking that would be nice in one of the loops to help with room dynamics on the fly. Has anyone used an equalizer that way? Thanks, sh Quote Link to comment Share on other sites More sharing options...
SaschaFranck Posted December 1, 2022 Share Posted December 1, 2022 On 12/1/2022 at 7:25 AM, luthierwnc said: I'm promoting my HX Effects from cab-miked ambience to its own pedalboard. Sorry, but I don't even remotely understand what scenario you're trying to describe. Quote Link to comment Share on other sites More sharing options...
luthierwnc Posted December 1, 2022 Author Share Posted December 1, 2022 I was using the device to add delay and a little reverb to a small power amp taking a direct line feed from a guitar amp speaker using a Radial CabLink box. The CabLink taps the signal from the guitar amp speaker out (speaker still there) and sends it to the HXFX in > HXFX stereo outs > small power amp stereo ins > speakers on the other opposites sides of the wall. I get stereo ambience from an ordinary amp. I've got an older Boss SE-50 on the way to take its place and building a pedalboard around the HXFX. There will be a fuzz and compressor before it hits the buffered HXFX for impedance reasons. A couple favorite dirt pedals go in loop 1. THE HXFX handles the modulation and time-based stuff. I'm thinking it would be nice to have a good EQ towards the end of the chain to tune frequencies to the room acoustics. Hope I did a better job with that. Cheers, sh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.