lemon Posted March 29, 2023 Share Posted March 29, 2023 Hello everybody, yesterday I used the 2-input-mixer on the side of the L3T for the first time (yes, I own the speakers for a long time, till now they were used for FOH only), and I discovered that channel input CH2 has a problem, it works for a while, then stops working, then works again and so on. Input CH1 is fine, so I think changing the combo input part will do the trick. Anyone could help me finding out which part this is? Thank you very much and greetings from Italy! Quote Link to comment Share on other sites More sharing options...
SmiffyG Posted February 15, 2024 Share Posted February 15, 2024 Spray some contact cleaner in there first. After that I'm guessing there'll be ribbon cables inside. Again if there are clean them with contact cleaner and reseat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.