milkmaaan Posted April 12, 2014 Share Posted April 12, 2014 hey guys - new here so if this already a post my apologies.i'm running a wireless G50 system from my guitar into my Pod HD Pro X into the LINE INPUT (L-MONO) on the back of my Pod set on the -10db switch, which is then going out into a SAMSON SERVO 200 Power Amplifier into a MARSHALL 4x12 cab. I play progressive/metal hardcore and the tones in this thing are absolutely phenomenal - sounds like a real amp. clean and drive tones sound fantastic when i plug straight into the GUITAR INPUT on the front of the POD, but i'm trying to keep the face of my rack nice and tidy so i thought i'd run wireless into the back into the Line Input. this is where my problem is - the drive channels and my pads and lead channels work absolutely fine, but i cannot for the life of me get the Clean channels to work through it - absolutely NO sound what-so-ever even though they work absolutely fine plugged into the FRONT GUITAR INPUT. can anyone point me towards a solution? cheers B) Quote Link to comment Share on other sites More sharing options...
bvaladez74 Posted April 14, 2014 Share Posted April 14, 2014 In the settings screen....3rd screen down called "inputs" make sure "line L" is selected or "guitar+line L" and make sure it's set to "global" and not "preset". Sounds like the dirty tones are on the correct input setting to match the line L jack you're using but the clean presets aren't...and it's probably set to "preset" and not "global". Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.