matthewfinnish Posted April 19, 2014 Share Posted April 19, 2014 Hello Guys, I have patches on both my boards (X3 live and HD500) that I use on different songs from different albums, all of which I have to re-create live. Is there a way of connecting the two boards together so that if I need a patch on the X3 it will run through the HD500 to the amp and FoH or vice versa? (HD500 through X3 Live) For example: Connect HD500 (or X3) to FoH via xlr; connect mono output from HD500 (or X3) to amp; link the two boards together so that if I need a patch from X3, the signal goes into HD500 and then out to FoH and amp. Thanks MatFin Quote Link to comment Share on other sites More sharing options...
BlueViolince Posted April 19, 2014 Share Posted April 19, 2014 You could connect the hd500 fx send to the x3 input with no return, and put the fx loop block set to one of fs 1-4, first block in every patch. That way, you can just hit the fs for the loop to send it out to the x3 without ever hitting any of the hd500 amps or effects. Then use a mixer, or di for both units to the board. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.