Jump to content


Photo

Using A Pedalboard Into Studio Ux2


  • Please log in to reply
3 replies to this topic

#1 sixsteve7

sixsteve7

    Just Startin'

  • Members
  • Pip
  • 4 posts

Posted 24 September 2013 - 04:01 AM

Hi everyone,

I've been plugging my pedalboard into my UX2 for a while now and jamming with a band through a Jamhub...damn awesome fun...;)
Now we are getting a little more serious and going for some good/better recordings....my question is this. I have an Eventide Timefactor last on my pedalboard. I would love to take advantage of the stereo outs on this pedal but of course on the UX2 there is only one input...Is it at all possible for me to use the mic inputs or line inputs instead??...

Cheers,

Steve
  • 0

#2 Triryche

Triryche

    Uber Guru

  • Line 6 Expert
  • 5076 posts

Posted 24 September 2013 - 04:56 PM

Yes.

Just run the L/R out of the Eventide into the UX2 Line1 and 2.

But you will not be able to the guitar or mic input simultaneously with the Line In.


  • 0

#3 sixsteve7

sixsteve7

    Just Startin'

  • Members
  • Pip
  • 4 posts

Posted 24 September 2013 - 07:07 PM

ah, that's good to know, thanks for that.....what about routing in the UX2 mixer..do I have to make changes there?...
  • 0

#4 Triryche

Triryche

    Uber Guru

  • Line 6 Expert
  • 5076 posts

Posted 25 September 2013 - 04:58 AM

If you are using POD Farm assign Line1 to Tone A and Line2 to Tone B and pan them hard L/R.

 

If you are not using POD Farm you can select LINE 1 and 2 in the Line6 Audio-MIDI control panel.


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users