drewburson

Ugh, I was all ready to say that this worked perfectly...then I realized that, rather than being programmed to have set values that toggle the switch, the HX Stomp is designed so that any MIDI signal on that footswitch CC toggles it to the opposite state regardless of the value. That effectively prevents an external controller from influencing it with presets, as it has no way of knowing the current state of that footswitch. Very frustrating, as it seems very counterintuitive to disallow that kind of control.

I can work with two settings. I've tried what you suggest, but it doesn't seem to work. Just to make sure I understood correctly, you're saying I should assign the Low Pass Frequency parameter to be controlled by a MIDI CC, then program the foot switch to send that CC in the Command Center? If so, then I assume that I have to have a full MIDI signal chain loop for it to work? Or is there a way to get the HX Stomp to respond to the messages it's already sending?

I'm controlling my HX Stomp XL mainly with my RJM PBC via MIDI, but I use the foot switches to manually bring in or modify effects on the fly. In particular I have a low pass filter effect that I use regularly, but I often adjust the frequency of the effect. Primarily I will control the effect via the RJM, but I'd also like to have a toggle on a foot switch. It appears however, that I can only assign a MIDI CC or a foot switch to control a parameter though - not both. I just wanted to check and make sure I'm not missing something as I try to figure this out, or if there are other potential ways I could accomplish this. Thanks all! (Note: I realize I could use snapshots, but I currently use them for some other effects, and I would like to keep them separate at this time.)

Besides some better reverb models, by biggest wish would be for a global blocks. For those like myself who use a preset for each song with consistent settings in between, the ability to connect blocks across presets so tweaking in one preset affects all the others would be invaluable and a massive time saver. The lack of it is why I only use external analog drives.