vidaljuanes

Hello, your amp has effects loop? if you recomenido you use the 4-wire method is: SEN POD ---> INPUT AMPLI. RETURN POD ----> SEN AMPLI OUTPUT POD ---> RETURN AMPLI GUITAR ----> INPUT POD must leave the switch in the Line mode (amp to Line) and also Loop Line. edit software let luegos first loop and you put the chorus, delay and reverb. Loop and before the compressor, wah, overdrive, distortion. also must leave the loop with retur (0-24 db) in 20db (software edit) and sen-7db. (this you have to pobarlos the idea is that the loop without the loop that you check your signal is lost or original sound of your amp. excuse my English regards Hola, tu ampli tiene loop de efectos? si tienes te recomenido usar el metodo de los 4 cables que es: SEN POD ---> INPUT AMPLI. RETURN POD ----> SEN AMPLI OUTPUT POD ---> RETURN AMPLI GUITAR ----> INPUT POD debes dejar los switch en modo Line del (de ampli a Line) y en el Loop tambien Line. el software edit dejas primero el loop y luegos colocas los chorus, delay y reverb. y antes del Loop los compresores, wha, overdrive, distorsiones. tambien debes dejar el loop con un retur (0-24 db) en 20db (software edit) y el sen en -7db. (esto tienes que pobarlos la idea es que con el loop y sin el loop tu compruebes que no se pierde la señal o sonido original de tu ampli. saludos

Hola, de la respuesta numero #11 me podrías ayudar con e tema de dejar en modo line la salida. existe un switch al lado del pedal de volumen del HD 500 que debo dejarlo en modo Line verdad? y luego dices que el interruptor de salida del loop de efectos también. es correcto? Luego en la cantidad de SEN y Return, seleccionar 7 db en el sen del loop de efectos. ahora yo tengo un Blackstar 1046L6. que debo conseguir? desde ya gracias. Hello, response number # 11 you could help me with and subject of leaving the output line mode. there is a switch next to the volume pedal that I leave HD 500 Line mode right? and then you say that the output switch also effects loop. is that correct? Then in the amount of SEN and Return, select 7 db in the effects loop sen. Now I have a 1046L6 Blackstar. I should get? from already thank you.

Hello, recently I have the 1046L6 and connect it to the Pod HD 500 with 4-wire method. I loved it. Also I have effects of distortion (Bloody Mary T-REX and the M78 Custom Badass) and are not as obtain the best results. you can connect the HD500 to the effects loop as a single pedal? guitar in the sin (1046L6) and output (L / Mono) to return (1046L6) from already thank you for your comments. excuse my basic English. greetings from Chile