GekkoJoe

Right. So the Mesa has the parameters whereas the Voodoo labs has midi CC 80 through 85 and that's it.....I'll try the instant access. Thanks for taking the time to reply today

I see. Ok, I will give that a try but I'm wondering if an instant command might toggle off a pedal if I used it in another patch. In other words, let's say I'm on a crunch patch and I toggle ON the OD pedal because I'll have it default to off. So I load up crunch patch, toggle ON the OD pedal.... then switch to my LEAD patch which will default to OD ON. Because I toggled my OD pedal to "ON" for CRUNCH, when I switch to LEAD will the instant command incidentally toggle the OD pedal "OFF"? Again, thanks for the help

Hello everyone, this is my first post so please forgive me if I screwed it up. I'm using a Voodoo Labs midi audio loop switcher and I'm running into a problem. Using the foot controller I can turn on/off my pedals but the problem is that when I change patches the switcher does nothing. In other words, if I'm on a clean patch using a compression pedal and switch to a crunch patch the compressor stays on. The Hex remembers everything and won't change any on/off parameters unless I manually toggle them. I'm using "Midi Toggle" and programming the corresponding Midi CC number on to the floor pedal in stomp mode. Just to be clear I am NOT using HELIX EFFECTS, these are in a pedal drawer. Here's the signal path. Wireless to Helix In 4CM to Mesa using FX Loop(send/return)1 FXLoop2 to the audio switcher is before FX Loop1 in the chain How do I get it so that the Voodoo labs audio switcher knows that when I turn on the Crunch patch I want the drive pedal on by default? And when I turn on the clean patch I want the Compressor pedal on as default? The phaser and the chorus I will keep as toggle. Thank you so much guys...this kept me up at night.