jmydlan

Thanks for responding. I am sorry that my english is not so good, but I hope you understand. I have read the manual and seen many youtube videos about this topic. It was a Line 6 Helix minute: Create multiple signal paths I learned that the 1B path has 50% wet signal. I didnt know that, but I have had a problem figuring out why my distortion blocks never gave me enough distortion. And then I understodd that since they where on my 1B path 50 % of the signal was a clean signal. So I wanted to move them all up to the main path. So after doing that and removing the 1B path all together the strange thing happend to my wah block, that it behaved the way it dit, even though it was not moved or touched at all. I made myself a new preset based on the 4 cable method preset in the helix, and copied all the blocks over. It workes well, so the problem is kind of solved. IF I figure out how to copy the "broken" preset over to my computer I can put in here for you to see, but no need to put much effort in to try to help, since I made a new that works.

I am using Helix floor, firmware 3.50.0. I have been using a 4 cable method preset for a long time with no problems. In this preset there is a y split signal path going down from the first row where I had several effects. I just recently learned that in this signal path there is only 50 % wet signal going through so I wanted to stop using this signal path and move all effects up to the main signal path. After doing that, my wah pedal behaved strange even though it has not been moved. First the volume raised when I engaged the wah (the volume knob on the helix was then half way up), and if i engage the wah when the amp is in the lead channel (PRS Archon amp) I cant hear the distorted sound at all, only clean and again much louder. What could this be?

I am unable to change the view of the snapshots. Either all are showing, or none. Even though I change the buttons telling to show snapshots at the top and stom down, its not happening. Is there a bug or am I doing something wrong? I use the latest version of firmware on the helix (2.01)