zachjs

I actually just installed the creators update in the hope that it would somehow fix my issue, no luck their either. I also just installed and tested the UX2 on a Mac running Sierra, same thing; the needles move, but no audio through the headphone jack, regardless of what the output levels are on the knobs. I'm thinking at this point that my UX2 is fried.

Just tested my UX2 on my brother's system and still the same result. The drivers install fine and the needles bounce as they normally would, but there's no output through headphones plugged directly into the UX2 itself, and I know the headphones are not at fault because they work with other devices.

For months now I have been running an Audio Technica AT2020 through my UX2 via an XLR cable, using Windows 10 64-bit, and everything was working great. Only recently, perhaps about a week ago now, the microphone completely stopped producing any input in Pod Farm 2. I've done multiple fresh installs of Monkey as well as all the most up to date device ans USB drivers, I've ensured the 48V button is still pushed in as it has always been, I've ensured the gain knobs are not set to 0 as they never were, I've tried different USB ports on my motherboard and case to no avail, I've ensured the UX2 is the default recording device in Windows as it always was, and of course I've ensured Mic 1 is the selected input in the mixer in Pod Farm 2. I should also mention that absolutely nothing happened between the microphone working and not working; the microphone was never bumped or dropped as it remains out of the way on a mic arm, the cable itself is coiled neatly on top of my computer case and it is never touched, and the UX2 itself sits on top of my computer case and is never touched save for when I adjust the gain knob. Because the microphone is producing no input whatsoever through Pod Farm 2 I'm inclined to believe it's a driver issue and not a hardware one, although I can't be sure. Oddly enough when I deactivate and reactivate the 48V boost while Pod Farm 2 is running I do get a signal as indicated by the needles on the UX2 itself, but recording from said input in Audacity to test produces only static. I've already opened a support ticket with Line 6 but have yet to hear back from them and I'm wondering if anyone else has experienced this issue. Any help is greatly appreciated.

No go on that as well, same result.

I have, everything save for Monkey itself is completely up to date, and for whatever reason I can't seem to update Monkey to the latest version. Regardless I've been using the same drivers and the same microphone setup with the UX2 for a number of months now with no issues, so I'm convinced the problem was introduced with this latest Windows update. If anyone else is still able to use their XLR microphone through their UX2 please let me know.

My Windows 10 did a brief update last night and I discover today that my XLR microphone, which is connected to my computer through my UX2, is producing either nothing at all or very loud static. Anyone else having issues?