andyman1974

My tap tempo is not sticking when I go from scene to scene - It seems to default back to 80bpm for any preset that does not have a pre-determined time.

Dry-Thru is clean.. Thanks for the idea. I will have to mess around with it a bit..

I am getting distortion running clean on some of my scenes. Some scenes were fine.. I tracked it down to tape delay. Running straight through no other pedals.. The other delays are clean but tape delay is muddy and overdriven. Edit: My Volume pedal is boosting the signal causing it to overdrive. Is this normal for a tape delay? What's up?

I found matte black tape and used a silver sharpie -

I have been able to work through some things - The help here has been great. I figured out how to get on to manual save latch mode. This is good as I kept losing my scene settings. I was saving a new scene it was my 4th scene (volume swell) - when I went to save it, it saved to something else, no swell but it changed the default scene. I then went back to stompbox mode - It brought me back to my settings for that scene as I expected but those stomp boxes are not working.. They are on, and lit up. This happens for all but one of my saved scenes. . if I turn on a stomp box that is not tied to the scene that stompbox works - Now if I go through the saving a scene process when I hit save the light flashes blue/pink Please help!!!

Another related question - Is the signal chain setup with the effect banks from left to right? FX1 - FX4 in order? so If I put a Qtr delay on FX1 and a .8th on FX2 they are in that order in the chain?

Perfect - Thanks!!!!

Okay, thanks for the response. The way I just hooked it up completely by passed the M13 - I just want to have a Rever pedal at the end of my chain = Post M13.

This might be a dumb question but. New M13 user. I am trying to run my Reverb stomp box last in my chain after my M13 - I figured if I just plugged it in to FX 0ut things would work. But the reverb does not work in that configuration. Please help!!! Holy cow it was a dumb question.. Reverb is last in my chain.. I should probably send it to the amp from there on the out on the M13.. Doh

Most excellent! I can quit worrying about it now.. THANKS!

I am about to pick up an M13 - for setting up a scene - I would like to set one that has a .8th delay followed by a second delay with 1/4. I would like to be able to tap them in with a 1/4 beat and have them know one is .8th and the other is quarter. My HD400 cannot tap in .8th without tapping .8th if that makes any sense.