Jump to content

hollowman666

Members
  • Content Count

    6
  • Joined

  • Last visited

Community Reputation

0 Neutral

About hollowman666

  • Rank
    Just Startin'

Profile Information

  • Registered Products
    1

Recent Profile Visitors

120 profile views
  1. its is not right of box. it had been updated, far from original firmware. it did connect with bluetooth to android. I had installed the latest drivers on pc. The 4 tone lights are solid not blinking. i was told or read that the light must be blinking to be in update mode. will not go into update mode or back to factory reset. tried on a differ computer too and like i said pc will not recognize that the amp has even been plugged into either pc. has anyopne tyhere been able to help anyone who has this same problem. have I mentioned the amp does nothing no sound when guitar is plugged in?
  2. I submitted a trouble ticket for this problem and this is the response I got. "Hello, Sorry to hear you're having this issue. Can you please try to re-boot your amp in update mode. Be sure to press and hold the TONE and TAP buttons while you power on your amp. You'll hold those buttons for about 5 seconds when you power up. Then, you'll want to perform the update using a MAC or PC computer. http://line6.com/sup...0tt-with-w-r701 Once you re-install the firmware, you should be able to boot up your amp as normal. Be sure to follow these instructions, and let me know what results you get." I tried this and no change. still 4 solid tone lights and a dim Bluetooth light. also I tried the factory reset thatg is in the manual that came with my amp "it says to hold volume knob down and the tone at same time when powering up still nothing. pc will not recognize it when plugged in usb still as well. very discouraging as I believe my warranty has just ended. this amp has been treated great it basically was placed in my living room and used occasionally always updated. and now it is sitting here like a very expensive brick, I will update on the next respose I get on my ticket.
  3. No that doesn't make sense. "As a work around you may be able to update the firmware with an iOS device." It wouldn't revert to factory default or go into update mode. no Bluetooth connectivity pc not seeing it plugged in. So i have a hard time imagining that somehow an apple product will magically work on this. I am getting very frustrated with this still waiting for another response on my support ticket. this is an obvious flaw in your equipment as I see multiple people are having the same issue. Line 6 needs to step up and stand behind their product. people on here have had to send their equipment for repair for this exact same issue, which is fine I suppose if you are still under warranty but my understanding is that your warranty is over in 12 month which oddly enough mine has just literally ended weeks ago i believe. but as of now I have a very expense brick sitting here in my living room. line 6 better seriously look at this problem and do something for their customers or they will loose customers if they even care. How were the ones sent into repair repaired? Or were these simply replaced with another that will fail again later, hopefully when the warranty is over. I have had amps for the last 30 years and never been so frustrated.
  4. I submitted a trouble ticket for this problem and this is the response I got. "Hello, Sorry to hear you're having this issue. Can you please try to re-boot your amp in update mode. Be sure to press and hold the TONE and TAP buttons while you power on your amp. You'll hold those buttons for about 5 seconds when you power up. Then, you'll want to perform the update using a MAC or PC computer. http://line6.com/support/page/kb/_/amplifi-products/ampl/how-to-update-amplifi-3075150fx100tt-with-w-r701 Once you re-install the firmware, you should be able to boot up your amp as normal. Be sure to follow these instructions, and let me know what results you get." I tried this and no change. still 4 solid tone lights and a dim Bluetooth light. also I tried the factory reset thatg is in the manual that came with my amp "it says to hold volume knob down and the tone at same time when powering up still nothing. pc will not recognize it when plugged in usb still as well. very discouraging as I believe my warranty has just ended. this amp has been treated great it basically was placed in my living room and used occasionally always updated. and now it is sitting here like a very expensive brick, I will update on the next respose I get on my ticket.
  5. i have the exact same problem was working fine then next time is used it same thing. all 4 tomne lights solid and bluetooth light solid and dim. Obviously there is a flaw. Mine I think is just over a year old. I hope line6 is willing to step up and support their product??
  6. I have the exact same problem with mine. all 4 tone lights and bluetooth but no sound, was working then all of a sudden nothing. Did you find any solution??
×
×
  • Create New...