doorsfloydzep

Thank you for the response and info. I will have to dig deeper into the sound area of the control panel folder because i didn't figure it out quite yet. I guess as long as it is in fact a possibility to hear the volume through the speakers somehow that's good info to know at least for in the future when I finally figure it out lol

Hello, now on my previous laptop (which ran windows 7) i could go into line 6 edit and hear my guitar if i had my guitar connected via cable to the hd500x which was then powered on and connected via usb to my laptop. Now, on my new laptop which is windows 10 i have the latest device drivers installed but no sound whatsoever. Didn't need to use external speakers or headphones to hear before so what has changed? i'm clueless

Thanks for the responses. The 500x master volume is above zero and the volume pedal is in correct position, but unfortunately I don't have headphones to utilize in the jack on the back of the device to check the sound that way. :/ ugh

The amp is ok and the cable is too. I plugged the guitar directly into the amp to test the cable and amp and yes, it works fine.

I'm not currently connected to the PC. Only cables I have plugged into the 500x are in the 'guitar in', '1/4" out L/mono", and the power plug in. Everything seems plugged in correctly but there's just no sound from the 500x coming from my physical tube amp. Is the problem that i have just a single amp and no head? Maybe some setting is incorrect, I'll have to keep checking. Being new to this sort of stuff is just frustrating lol

Thank you for your response. I appreciate it. I'm also wondering why I have no sound out my amp. I've plugged the HD500x into my laptop and used the edit program and presets worked but there's just no sound coming from my amp in regards to the HD500x. None of the volume knobs are zeroed out so idk what I'm doing so wrong.

Hello. I'm a complete newbie when it comes to this digital stuff. I'm trying to connect my pod HD 500x to a fender hot rod deluxe III tube amp. I guess I'm doing so.etching wrong. I have the 1/4" out switch on the board set to amp. My guitar is rugged to 'guitar in' and the cable out of the 1/4" out mono on the board is connected to the 'amp in'. I feel like an idiot and am frustrated so any help would be appreciated. Thanks