itsmeray

Spider IV 75 I know this is an old amp but Many people still have it . and No Line 6 Support. Please Note! This is a article found online . Does anyone know anything more on this . This is what I found Online. I There is a HUGE BUG with the Firmware 2.0 for the Spider IV 75. If you try to restore the "Factory Presets" using the method by powering the amp off, then pressing and holding the "A" button, then powering the amp again, and waiting for the screen to ask you to confirm the reset of the "Factory Presets", then you're going to make a MESS with the IQ of your amp. It simply doesn't work at all ... the result is a HUGE NOISE for each and every preset and for each and every amp setting. The only way to go is to 1st make a safeguard on your computer of your personal preset bundle under Firmware 2.0. Then you must install the old Firmware 1.01 (or the last Firmware under which the reset method worked without trouble), then you can SAFELY use the reset method (power on while pressing "A" button), and then you must install the Firmwares back to version 2.0. In the end you wind up with your amp loaded with the Factory Presets running under Firmware 2.0, and you can finally make a safeguard of that Factory Presets Bundle on your computer. Either Line 6 decides to update the Spider IV Firmware (like a version 2.01) to include a FULL FUNCTIONAL RESET PROCEDURE, or you need to go back to the last Firmware under which the reset method was still working fine. Ray

Here is all the Firmwares I downloaded for the Line 6 Spider IV 75 amp. Hope this Helps The firmware for the Line 6 IV amp On Line6.com Downloads is there but in order to show all previous Installs Before Firmware 2.0 you have to select windows XP . Then it shows all the previous versions. Ray Spider4_75_1.01.spf Spider4_75_1.02.0.spf Spider4_75_1.04.spf Spider4_75_1.52.spf Spider4_75_2.00.spf

The firmware for the Line 6 IV amp is there but in order to show all previous Installs prier to Firmware 2.0 you have to select windows XP . Then it shows all the previous versions. Spider4_75_1.04.spf

One reason that it won't go into factory reset is that you are connected to your pc . It happened to Me. Make sure you unplug your USB first . If you are connected to your PC and are using the Line 6 Spider iv Edit, it wont do a factory reset. Unplug USB then Try Factory reset . I held the (A) Down while powering up. about 5 seconds , then was able to press the presets Dial in . and again to confirm. for factory reset . Here's a tip: Before you do a factory reset Turn all your dials down to 0 , I was told you will have less trouble with the volume levels Hey anybody Know where to get tones for the Spider IV 75 amp and or Pod xt Live. Quote Edit Options

make sure you unplug your USB first . If you are connected to your PC and are using the Line 6 Spider iv Edit, it wont do a factory reset. Unplug USB then Try Factory reset . i held the (A) Down while powering up. about 5 seconds , then was able to press the presets Dial in . and again to confirm. for factory reset . Hey anybody Know where to get tones for the Spider IV 75 amp and or Pod xt Live.

Whats the Max Recording time on the Looper on the Spider iv 75 ?