cliffy1199

thanks ive decided to return it to thomann as i beleave it to be a hardwhre error of some type thanks again

well i was confident the reset would work but no joy anyone else have any ideas

thanks all sound advice i shall look into this tommorrow as its late in uk

Hi guys, I bought a wonderful helix last Christmas, but from opening the box and plugging it in, it has strange vertical lines in the centre. But when I heard the sound I was amazed and wasn't bothered with the lines because it didn't interfere with the sound. Of course over time, the problem's got worse by all manner of strange things happening on the right hand side of the screen. And now it's black (right hand side of the screen) And all this in the hight of season> So does anyone know or has any ideas about this issue or solutions Do you think Line6 would do an immediate replacement door to door carrier style PS: I bought it from Thomann and they said its a 3 weeks turnaround which is near impossible in this the busy season

Hi all thanks for replys. The forum stoped working for me and i only got back on it now. So some good awnsers here and thanks to all i beleave i now have a good 4cm set up with an amp and my preamp plus fx pre and post. Im now trying to just use my amp but with fx pre and post. Do I need to just put in an fx send return block and put pre fx before and post arfter. I ask this as it dont seem to be working properly

Hi well not so much as a 4cm as 2cm to fx return on amp will still do what I need. Its more underderstanding the paths, routes and splits on the helix to accomplish what id like to do. my thinking is to have the paths set up for both 2cm, 4cm and same path with no pre amps to see if my amps or pre amps work best. if anyone with understanding on paths could chime in id be absolutely thankfull. I have tryed some of the templates but not only did i not realy understand it, I couldent modify them to work correctly for what I want Thanks

anyone?

Hi all. I got a helix for xmas [bless the wife.] So far i absolutely love it, and have been useing it firstly 2 cable strait in front, then progressed to four cable. And now lastly 2 cable into fx return with pre amp. Soooo. Its taken all this time to understand just how id like to use it. My main problem is paths and routes, what id like to acheive is...... 1 A path with 2 pre amps [footswitchable] fx before and arfter into amp fx return 2cm. 2 Same as 1 however this time 4cm. 3 Lastly and most importantly. useing just my amps [Cornford mk 50h] and [Mesa mk3] pre amps. so just fx before and arfter my real amps pre amp. My problem with this is how to route path so i can get clean dlys arfter my pre amp and of course drives beforehand. ive read a lot of things on forum but still dont understand. [Must be an age thing.] So if someone could post a clear path with all vol, eqs and split blocks and possably an easy explanation of why they put whatever block especialy split bocks that would be a grt help to this old crock. thanks all

So i see the add....../ yes Im drooling so where and what can I do to get it. Grrrrrr Frustrated