sideshowsmitty

Thanks a bunch. The Output Block Level may do the trick for me. To boost solos (when using the PodGo, which I'll do on the LT as well), I've been using a 10 band eq pretty flat with the mids bumped a tiny bit, and the level up 2.5DB and that has been working for me. What do you us? Thanks again for the response!

I purchased my Helix a few weeks ago, after using a HX Effects and PodGo so I was familiar with creating patches, etc. I purchased some IRs and have created some presets with mutil cabinets and they sound great, like mixing a 75wt celestion cab with a V30 or Creambacks cab. With two cabs, the signal/volume is significantly louder. So far I've only plugged into a DAW but want to use this at my next gig directly into the board, using my IEMs. My concern is that the patches with the split cabs will be louder than the combo amp or single cab patches. Whats the best way to work with this? I'm still a newbie to the Helix without an amp. I used the HX Effects with the 4 cable method through my Marshall mini jubilee, and then starting using the Podgo as my pedalboard with the 4 cable method through the Jub. I did a few gigs with just the Podgo and felt good enough to upgrade to the Helix which is capable of so much more. Thanks in advance!

Thats actually the main preset that I use most. I'm getting better at dialing in sounds, so I may delete it, or move all the blocks to separate presets to see which one is corrupt so I can try to figure out what I did to corrupt it and not do it again. Thanks for the replies!

Thank you! I just tried that, and the F3 button turns on after a few seconds by itself when I turn it off. I turned it off and saved it before it went back on and that did the trick. Strange. As always, I appreciate your help Phil! Cheers!

First off, thanks to everyone that always replies on here. You guys are all very helpful. I know I'm missing something simple here. I just got a new expression pedal that I'm using for my wah. I believe I set it up corrrectly. When I switch to my main patch, the wah is always on. The heel is all the way back. When I lightly touch it, the wah goes off. When I switch patches and go back, the wah is on, until I step on it again. I can't seem to figure out why. Position is set to 5%. What am I missing here? Thanks in advance!

I changed the file extention to .hlx and it worked. The Customtones that I downloaded had a .l6t extension. Once I changed the file extension, I was able to import it into a blank preset.

I clicked on HX and can see some presets for HX that have been uploaded in the last few days. I thought I"d ask before trying. Thanks.

Firmware is 2.54. I do have snapshots. Thanks.

Is anyone else receiving this error when trying to create a backup in HX Edit? Thanks

Thanks! I did that but now I have a weird issue. When the wah is all the way back, its on, but as soon as I push it forward, it goes off. I'm sure I"m missing something simple, but I can't figure it out. Thanks everyone for all your help!

Thanks for the reply. I didn't know that was possible! Do you have them plugged into the Pedal/EX Amp 1 and 2? Thanks again.

I'm really digging my HX Effects. I'm so used to always just stepping on my wah and volume pedals when I need them though, and can't get used to stepping on a button on the HX, then going to the expression pedal for a volume or wah effect. I'm using the 4 cable method, and want to just have my volume and wah pedals on the board next to the HX so I can use them at any time. What is the best way to hook them up? Thanks in advance!!

Thanks!

Is it possible to assign two effects to the same button? If so, how do you do it? Much thanks in advance!

Is there an ETA on when we will be able to use the HX Effects with the Customtones? Thanks.

HX Effects

Hey there. I just purchase my HX a few weeks ago and am still getting used to it. Will there be a CustomTone page to download presets for the HX? Thanks.