bigfishcatcher
-
Posts
11 -
Joined
-
Last visited
bigfishcatcher's Achievements
-
the stadium does seem lower volume than my old helix for sure
-
so the Headrush vx5 is connected by usb and does not seem to get midi commands so I connected up my older TC helicon voice live 3 and used the midi ports and it does get the commands
-
global midi settings midi over usb c on midi thru on global midi channel 3 bypass midi channel 1 recieve midi pc usb send pc w preset usb duplicate send pc off send snapshot cc on
-
I have a Headrush vx5 vocal pedal it can accept midi messages through USB but it does not allow you to enter a midi device number I use the USB A on back of the Helix and from my phone use USB C to the back of the HELIX
-
and the button sends a midi to a separate device I have set that up in stadium but I can not get the stadium to forward the midi message to another device I have programmed switch buttons to send the midi but now I need to be able to send the midi to press the buttons
-
On the original Helix you could send midi messages to simulate pressing the switch ex CC50 can this be done on the stadium - I have had no luck figuring it out I use it where I use stage traxx 4 to send the midi command to simulate a button press
-
could you please add a feature like a sine wave where you set the time for it and then assign the value of the sine wave to a parameter I don't think it would take a lot of processing and think of all the possibilities
-
I was wondering if it would be possible to add a modulation that would make the pedal work much like a tremolo bar - I know there is a simple pitch tone and that could be set to change by the pedal - but it seems it would be easier to take the guitar tone and drop it this way someone without a tremolo bar could get the effect from the Helix thanks for considering
-
wow thanks will see if I can get it working
-
are you sure if I were on EXP 1 playing the backing track and wanting to switch to EXP 2 pressing the toe switch would either max the backing track or zero it before it would switch to EXP 2
-
I would like to be able to switch between the expression pedals 1 and 2 with one of the other footswitches. that way I can set the volume of backing tracks with one exp pedal and then switch to the other pedal without moving the first ones position. is this possible