Looks like you are running it similar to how I would like to to run it when I get it.
I think it is going to depend on how you would run it into an amp and style you are playing. If you would normally go directly into the front of an amp then then put all your drives into the front and use the effects loop built into the stomp and run your time based effects and you can run after any effects you want on the stomp and then back to the amps and out to FOH. If you like to put your time based stuff into the FX loop of an amp then there is that option too. If you check out the Andertons youtube channel they have a video with the Line 6 UK guy there doing some stuff on it and they have it running into a live amp and direct into their DAW. Which is a cool option! But to get back to it... You should look at this from the "how do I run a normal setup to an amp" kinda thing and go from there.
Here is an example of what Im looking to do.
SP Comp > POG2 > mojomojo > ts808 > volume pedal > into Stomp > have 1-2 open slots for modulation > out to timeline > bigsky > back to stomp have 1-2 open slots for effects (rotary, trem, ect... stuff I like after my reverb) > then into amps > out to FOH
Where I have the extra slots will all depend on what effects I run on the stomp or if I run into a live amp after it or into the FOH.
Here is a link to that video: https://youtu.be/z0rcv1LBO_s
They also explain what the expression/switch is used for. Basically its to add 2 extra buttons or to run expression pedal. They use an expression pedal in the video.
Hope this helps!
