Cowboy91

Thanks for this, much appreciated! 4) ran into the same issue for some reason, Ive tried assigning it to the expression pedal and its working well and actually a lot more flexible having the sweep as opposed to just two preset options, I used to do something similar with the mix knob on my el capistan where I where have used a sweep of settings by moving the mix knob with my foot

Hi all, I've had a longstanding issue with my helix and pod go which I can't seem to find any advice on in the manual or other forums Basically my helix is set to 4 stomps and 4 snaps I have two delays assigned to one button a delay with low feedback and mix and a second delay with high feedback and mix, when I activate the delay with high feedback and mix the first time the button its assigned to will light up green to signify that its on and the other delay is bypassed, after a while of playing and switching between snapshots the assigned button seems to get confused and the button lights up green to signify that the short delay is on within some snapshots but will light up green to signify the long delay is on within other snapshots, the only solution to resolve this is to exit the preset i'm on and re enter Is there any solution to this I have done a fair amount of research and can't seem to find anything, I've used both snapshot recall and discard to no avail and I experience a similar issue on the pod go as well Any help is much appreciated Thanks

I bought the voodoo labs current doubler adaptor and the line 6 2.1 -2.5 adaptor which Is running out of my strymon zuma into the stomp and the stomp won’t turn on , is there something I’m doing wrong? My other pedals are working fine with the zuma I tried a true tone l6 adaptor which converts 2.1 to 2.5 and still no power

thanks for the help! Basically I don’t have enough free blocks to use 2 different amps and IRS, so I want to use my main amp which is the Revv D20 with the fender deluxe reverb and IR of the stomp for my second amp to create stereo so my el capistan runs stereo out in my big sky then when using the revv the left output of my bigsky goes into the revv. Then the right output of my bigsky returns to the hx stomp, then the left side of the stomp also goes to PA, so my delay and reverb are split across two amps creating a stereo sound I hope?

Hey guys sorry I know this is a basic question but I can’t seem to find an answer in the manual, basically I have always played in mono and I’m now trying to get my head around stereo my signal chain is as follows Guitar > stomp > stomp send which goes > overdrive mono> delay stereo output > reverb stereo output > stereo return of stomp then I’m using just one amp and an IR 1)basically if I plug into a pa from the left and right output from the stomp after this even though I am only using one amp and IR will it retain the stereo spread of the delay and reverb? Or will it all be summed to mono 2) also if I use the amp model from the stomp as one output, then instead of returning one of my reverbs outputs into the stomp send I go directly into another actual amp, so that the stomp amp and ir don’t affect that amp so left output is stomp right output is amp will this create a stereo spread? Thanks again