craigl6

Did you ever resolve this? I have had a similar problem for some time (Windows 10, Behringer USB interface). For me it happens with non-custom presets too. I have found that I have to load the "More Than a Feeling (Boston)" preset to fix the issue and then I can select whatever preset I want and it is back to normal. I'm not sure what is so special about that preset but I contacted support and unfortunately they were not able to figure it out.

Has anyone been able to get this to work properly in Native? Even with the mix level turned up all the way, it seems like I can still hear the original pitch. The sound is also not stable (becomes kind of "warbly"). I am using a Focusrite interface inside Sonar.

I looked all around for a config file, but couldn't find one. I just use my DAW now instead.

On my Scarlet Solo, I am using input 2 so I have to go in each time Podfarm starts up to switch from input 1 to input 2 (it annoyingly does not remember the input selection). After I change the input, I get bad clipping until I select a certain tone (Boston, More than a Feeling) which seems to put it back to normal.

I have replaced my Toneport with another hardware interface. Every time I open Pod Farm 2.5, I have to go into the settings and manually change it from input #1 to input #2 since the correct input is apparently not stored. Is there some workaround to get it to use/store the correct input port? Thanks.

I see now that the preset Pod Farm 2 fbv configuration is not set up to do incremental (next/previous) changes but absolute bank selection. I changed 2 of the switches to do incremental bank changes (for setlist) and the other to do incremental program changes (for tones in current setlist). This works as expected at first, but inexplicably just stops switching at a some point? I changed these to use the direct Midi CC commands which seems to work consistently but it doesn't automatically load the first tone when switching setlists (which the bank change does when it is working properly). I guess I can live with this but it is pretty disappointing that it is not working properly.

I installed and ran the FBV Control app and loaded the Pod Farm 2 configuration. All the Express midi outputs are selected in the Pod Farm 2 midi settings. The "A" and "B" switches do change to the next and previous Set Lists as expected but the "C" and "D" switches don't change to the next and previous tone presets in the current Set List as expected. There is a little hiccup in the sound that suggests that it is doing something when the "C" and "D" switches are pressed but it doesn't change the tone preset. Any ideas? Thanks.

I was initially uncertain about the toe switch in the MKii Express pedal also when I was trying to calibrate it. You just need to stand up and put a decent amount of force on the top of the pedal and it will trigger the switch underneath (you will hear a click).