I am looking for a device that can allow my Line 6 Spider V240HC and AXE IO interface to be able to change presets together. Wondering if I were to use an older POD 2.0 or POD Pro Rack unit whether I would be able to use my Behringer FCB 1010 foot controller to send MIDI program switch changes to all three deivies where the AXE IO is connected to the POD 2.0 (POD Pro) via DIN connections and from the POD 2.0 device to the Spider V 240HC via the FVB jack on the back of the POD unit and have all three devices switch in unison.
Wondering if anyone has information on whether it is possible to connect the FVB port of a Line 6 Spider V240 HC to the midi output of an AXE IO interface so that it can be controlled in tandem. We are using the amp out feature of the AXE IO to send signal over to a Line 6 Spider V240 HC and we would like to be able to control presets to change together with a single control unit - which in our case is the FCB 1010 Midi Foot Pedal. Don't really wish to do extensive programming; just want to be able to step through the various numbered preset changes simultaneously in AmpliTube on the AXE IO and send signal via midi from that interface with something like a DIN to RJ45 connector over to the Line 6 Spider and have the corresponding numbered presets on the Line 6 unit change in accordance to those being changed on the AXE IO. Hoping it is just the matter of making a single connection and won't require additional interfaces to create anything as complicated or expensive as an RTP-Midi network. Is this possible? New to this.