ALL Vetta Owners... I recently owned 5 Vetta's, 2 are being used by my nephew's band's guitar players... of the 5, 3 developed the EXACT SAME ISSUE within about 6 months of each other. In addition to those I also have 2 HD147's, of which 1 did exactly the same thing within just 2 days of my Main Vetta Combo.
It took me a while to figure out exactly what was causing the issue, which was: It was working, jamming and then nothing, no sound other than a bit of output hiss at high volumes... then it was moved, and all of a sudden it was working again... all the lights everything worked, just no signal... Eventually I opened up an HD147 The 5pin/wire Connector cable from the Input PCB to the MAIN PCB just seemed a bit too floppy and when I snagged it with everything on, the amp was alive again, and then no sound again... there was obviously something wrong with the cable when I tested continuity. When I cut them at the parts that seemed to have no wire stiffness at all, I found that 3 of the Wires INSIDE the cable had corroded and turned into dust. on the other 2 amps, exactly the same corrosion on the same cable. Unfortunately, it seems that the part is no longer available.... but, really, wires turning to dust? and completely mind-boggling that in a premium amp the quality of wire used would disintegrate? Of all the great parts of the Vetta Design, an accountant must have had it's say for that part (since I just ordered 10 for $1.27 from China Including Shipping). (I did spend quite a bit of time tracking down the Manufacturer though) 2.0mm XH is what to look for if this happens to you. Let me know if anyone needs any links or more info.
cheers,
Adnan/ConspiracyToCommit