hevimental
-
Posts
19 -
Joined
-
Last visited
hevimental's Achievements
-
The mainboard and display have been replaced.
-
The problem is still there, but I haven't sent it to the service center yet.
-
The power supply is original
-
Pod Go took a very long time to boot. Previously, it started immediately after pressing the power button. Now it can turn on about 20 seconds after pressing the power button. Factory reset did not solve the problem. Anyone had a similar problem?
-
I finally liked this amp after the update
-
hevimental changed their profile photo -
Yesterday I had a similar problem twice during band rehearsal. After turning the guitar down with the potentiometer and turning it up again, there was no sound at the output. He had to re-insert the cable that went to the mixer to get the sound back. This problem did not occur on the previous software.
-
I play at 30W at half power
-
You can try to plug into the CD/MP3M socket, then you will not have any simulation from the amplifier and you will be able to use the Boss simulation
-
Pitch Shift works if I connect a POD Go by RETURN?
hevimental replied to rarellano's topic in Catalyst
Hi, I use go plugged into return. Nothing from Catalyst works in this configuration. Unless you need to switch to pre/post in the application. -
I don't like Catalyst simulations, that's why I have Pod Go entered in Return. And I like this sound very much.
-
FBV Express MkII & Catalyst Amps
hevimental replied to ckutblue's topic in FBV Controllers (MKI / MKII / 3)
FBV does not work with Catalyst. -
Try vacuuming inside. Maybe dust is causing problems.
-
Catalyst abandoned already? Sale prices everywhere and no updates...
hevimental replied to stumblinman's topic in Catalyst
Unplug the Catalyst from the power supply. Connect the cable from the Blues Jr amplifier directly to the terminals on the back of the Catalyst speaker. -
Have you tried these? https://line6.com/customtone/tone/5947484/ https://line6.com/customtone/tone/5925671/
-
I agree, it has a little low gain. Use additional metal zone or other strong distortion.
- 3 replies
-
- 2
-
-
-
- customtone
- dimebag
- (and 4 more)
