Elenaclark

I just want to say that It's possible that the issue with the FBV3 not working with the Pod HD Pro is related to compatibility or a software conflict. Here are some steps you can try to resolve the issue: 1. Check the compatibility: Make sure that the FBV3 is compatible with the Pod HD Pro and check the Line 6 website for any firmware updates or compatibility notes. Reset the Pod HD Pro: Try resetting the Pod HD Pro to its factory settings to see if that resolves the issue. 2. Check the connections: Ensure that the cable connections are secure and free from damage. Try a different cable to rule out a cable issue. 3. Try a different USB port: If the FBV3 is connected to the Pod HD Pro via USB, try connecting it to a different USB port on your computer. 4.Contact Line 6 support: If the issue persists, reach out to Line 6 support for further assistance. They may be able to help you resolve the issue or suggest a solution. If none of these steps work, it may be necessary to return the FBV3 for repair or replacement. DinarGuru

Oui, je peux vous aider. Il y a plusieurs raisons qui peuvent expliquer pourquoi la pédale ne fonctionne pas lorsqu'elle est connectée à l'ampli. Voici quelques vérifications à effectuer my account access

Thanks for sharing that information. MyCCPay

It sounds like your AmpliFi 150 is experiencing a failed firmware update. Here are a few things you can try to resolve the issue: Hard reset: Try performing a hard reset on the AmpliFi 150 by pressing and holding the reset button for 15 seconds. This will restore the device to its factory default settings. Reinstall the firmware: Try to reinstall the firmware using a USB drive. Make sure you are using the latest firmware version that is available on the official website. Use the AmpliFi App: If you have the AmpliFi App installed on your mobile device, try using the app to update the firmware. Contact support: If none of the above solutions work, it is recommended that you contact AmpliFi support for further assistance. They may be able to provide more specific troubleshooting steps based on your specific device and firmware version. It's also important to make sure that you are following the correct steps when updating the firmware and that the device is not losing power or connectivity during the process. Keep in mind that a failed firmware update can also be caused by a power outage or a problem with the device's storage, so make sure to eliminate these possibilities. All Savers Provider Portal

I just want to tell you that A friend gave me his AMPLIFi 75 last year. Worked great up until about a month ago but since last week ago I felt same things happening with me still not find solution. Your Texas Benefits

I am still want to know answer of that and there are ..... Dairy Queen Survey

I am just buy that new and I love that this pedal expands the functionality of the Spider V 240HC to the floor, but I was running into a big problem right out of the box. The whole pedal would freeze seemingly on its own. As it turned out the included ethernet cable is junk. Wiggle it just slightly where it attaches to the board or the amp and the pedal would freeze. I swapped it with another cable I had laying around for years and I'm back in business.