mrmapatton

Uh. We are talking load out, not load in. See my previous post.

I’m sorry if I am being dense, but my patches will be preloaded. While I appreciate everyone’s help, this discussion may have ran its course. I noted a few posts back I came up with a solution. It meets the parameters of the venue where I am paid.

Well again, as I have noted, these are house rigs. I have a 60-120 sec video bumper to exit the stage. If I can’t get it all off, then I need to wait an hour or so to do load out. if I forget to remove that patch cable. It may mess up the next players patches. So no configuration changes. picture it as this, you rent a car. You. Can set the AC and radio to what ever you want. You can’t repaint it or perform engine modifications this is not really odd in the world of using house gear. Faced the same thing in the 80s with a house rig. You can turn the dials anyway you want, but no, you cannot put KT88 tubes in the JTM45 that has 5581s in it now. So I brought my own JTM45

Well in the patch each delay is independent, not stacked, and are X/Y ed. in that I mean each has three modes, Off, time div 1, time div 2. one is set as 1/8 and *1/8. The other is *1/8 and 1/4. in that my possibilities are: 1/8 *1/8 1/4 1/8 and *1/8 (not stacked) 1/8 and 1/4 (not stacked) *1/8 and 1/4 (not stacked) I willing to lose the 1/4 The other older patch I found just had the *1/8 split out. it’s important that the delays aren’t stacked.

Thank you. and I apologize for my curt responses last evening. Was not in a good mood and no one here served to be treated like that. The reason for no config changes is, 1. I’d have to undo them. I only have about 60 seconds to get off stage. 2. if I leave them, it may mess up other peoples patches. They have no problems with presets, I asked for 5. I’ll bring them to them and they will load them. I’ve come up with a suitable solution in reviewing 1 of my previous Fractal patches where I only ran 2 lines instead of 3. I’ll set that up today and try it. Thank you everyone for your help

Keep in mind, the reason to get the Helix was: 1:simplify load in/load out as it’s house equip at 3 venues anything that detracts from me simply going on stage, plugging into the house gear, playing the sets, walking off and cashing my check is a HUGE step in the wrong direction. Any step off that path and I should load in/out my Fractal gear I’ve been using for over a decade. Been able to create this patch for over a decade.

Sorry, I’m an not allowed to make physical configuration changes to house gear. I can turn knobs, I can load my own patches, etc. I can’t be plugging different stuff in. if I wanted to fight that battle, I’d just just simply keep loading in my Fractal rig. That would be easier than buying more gear to get something to do what I can already do.

Honestly, that solution won’t work in my scenario. While I just got a Helix LT myself, it’s the house rig at 3 of my venues. I’ve gotten permission to create my own patches for them, but I’m sure they would frown on any reconfiguration. im trying this to decrease load in/load out and not take my Fractal rig with me on those 3 gigs.

Thank you so much!

Like this

I need 3 paths, 2 paths, 1 for each delay , and a 3rd path (main) that chorus and reverb exist in. I do not use delays in series with chorus or verb.

Next question. Can you run 3 paths? I see 2 but unsure if 3. I tend to split out my 2 delays into separate paths (each delay has its own unique path outside of the main path) and rejoin them after chorus and reverb.

I saw a video on using Command Center to set up a button in Stomp mode to change Snapshots. I only saw 4 snapshots available in the video. Will look deeper.

Thank you, kinda wanting to stay with stomp mode as I need a minimum of 5 item tempo unique patches per set. Snapshot only offers 4. I will play around with it this weekend.

Hello Peter, TBurst Std here.

Is there an A/B/Y option (not sure how to reference it) for a block. So picture stomp mode and a single delay. Can I set it up so that is off, if I tap its on (say 1/8), if I tap and hold it becomes *1/8? Something I use heavily in my Fractal.

Hello everyone. New to the forum as a just got a Helix LT for my practice room. I've been a Fractal guy since 2009, but a couple of the venues that I play at have house supplied Helix LTs available. (Whose not open to reducing load ins/outs?). So I figured it would be good to join to learn from all of you as well as to share anything I come across. This coming weekend I will dive into the unit as I have no gigs scheduled. I already have a few questions, but heh I am only 1/3 way through the manual.