guitardad123
-
Posts
216 -
Joined
-
Last visited
-
Days Won
2
Community Answers
-
guitardad123's post in Copy effect from one preset to another? was marked as the answer
No, but what I do is have a template preset of my effects. For that I just switch the amps and cabs around as I need. I store 4 basic templates in my last patch bank. Easier to do with the PC and Mac editors too, but I like to keep a bank of templates on the amp itself.
-
guitardad123's post in G10T suddenly stopped charging was marked as the answer
G10T won't charge if amp is off. They do make a USB charge cable. It's 15 bucks on Amazon or most stores
https://www.americanmusical.com/Item--i-LIN-G10CABLE?src=Y0802G00SRCHCAPN&adpos=1o3&scid=scplpLIN+G10CABLE&sc_intid=LIN+G10CABLE&gclid=CjwKCAjwj8bPBRBiEiwASlFLFe1DHOHi9juJSNPzN1OUIVDwWhRpNGxszhkzIgedQun3ulc9_eNvIBoC_woQAvD_BwE
-
guitardad123's post in John Frusciante Tone for Can't Stop was marked as the answer
You can try taking the eq gain levels down on the Low and High shelf. If you need the tone thicker, select the Low Mid Freq at about 450, gain of 2 or 3.
High mId Gain take down to about 3.
It's going to be different with the 8" speaker than it is in 12" speakers which have more bottom end by design.
That was a setting I used for Californication
-
guitardad123's post in Is there an effect that would let me simulate drop tuning? was marked as the answer
Use the Pitch Bend effect
Pos 50
Heel -1 (for one semitone below, -2 for a whole step down, -3 for 1.5 steps down etc)
Toe 0
Mix 100%
You can use any preset or amp model type you want, but it works better on dist amps.
Note that using Delay with the pitch effect may pulse at times at the tempo of delay. You are putting one fx type into another.