darkman

nothing else to say. not it works. i still don't understand why (with the same) was not working before btw, thank you so much. now it works perfectly.

Wait. i can pan center, ok, but i don't get any stereo output. is always mono. 100% mono. really, what's so the difference between the normal delay and the stereo delay if the output is always mono? i still don't get the point. I mean, the knobs for the stereo delays explicitly says left/right. it wouldn't have any sense if the result would be just mono. isn't it or am i missing something? is not a matter of panning, is just a matter of having stereo output. so, i'm expecting to have left channel different from right channel.

Hi, i've a pod live X3. everything seems to work fine, except one thing. i don't understand how to get a stereo output. Here is what i want. I'm not using dual tone. i pan tone 1 on the left and tone 2 on the right. Suppose to have a chain of effects and amp. I would like to use the "stereo delay". Since is "stereo" i'm expecting to get a stereo output. On stereo output i put 100% mix 1000ms of delay (just to have a big delay) 0% right feedback 0% left feedback 0% offset post-config (notice that THIS effect is the last of the chain) Here are the possible outcomes: -> with this configuration is just get sound from left side with no delay -> if i put 100% offset i get just the sound delayed. just on left side -> if i put the pan in centre, i get sound from both side -> if i get down the mix % i get no difference. always on left -> if i set pre-config, it doesn't change anything how may i have a stereo output? if not, what the meaning of "stereo" in this effect? nb: the two XLR outputs are connected to a different input processes, so i can check if i get some signal in input. i search online and it seems that someone was able to do. if so, may someone explain me how to do it?