denisfarr

If I add a send block to a signal path to send the dry signal to a separate output and have effects after it in the path will the signal continue on the path to the effects?

Thanks!

When using a IR block does it collapse any stereo blocks before it to "Mono" or does the signal remain "Stereo"? Thanks, Denis

Here is a routing scenario I am considering: Guitar> Helix> line out> Guitar input of Mesa Boogie Jp-2C tube amp>Speaker out>Suhr Reactive Load box>Helix Line in>Split path>Cab IR (one side goes Into Stereo Effects Path/Other side goes to Cab IR to output> Focusrite Scarlett 816 Gen3> Logix Pro on a Mac Computer. Let me know what you think

I have a Helix Floor, a Scarlett 8i6 3rd Gen, and a 2021 Mac with Logic Pro. If I record my guitar using the Helix floor USB into my Mac with the Logic Pro DAW, can I monitor while recording from my studio monitors plugged into my Scarlett 8i6 3rd Gen interface? Thanks, Dfarr

I have a Helix Floor, a Scarlett 8i6 3rd Gen, and a 2021 Mac with Logic Pro. If I record my guitar using the Helix floor USB into my Mac with the Logic Pro DAW, can I monitor while recording from my studio monitors plugged into my Scarlett 8i6 3rd Gen interface? Thanks, Dfarr

Thanks!

Would all 4 cables still be 1/4" TS to 1/4" TS. Would there be any ground loop issues?

Would this 4 cable method work as a Wet/Dry/Wet scenario with a Helix Floor and a Mesa Boogie JP-2C?: Guitar into Helix Guitar input jack. Helix Loop #1 send jack to Mesa JP-2C guitar input jack. Mesa JP-2C effects send jack to Helix Loop #1 return jack. Helix main output Left and right 1/4" jacks to stereo power amp left and right input jacks. Stereo power amp left and right speaker output jacks to 2 Mesa 1X12 Recto cabs for left and right "Wet" sound. Mesa JP-2C speaker output jack to Mesa 1x12 Recto for center "Dry" sound. Signal path on Helix Patch: Guitar in> Compressor>Overdrive> loop #1 send and return ("Dry" Sound)> Stereo Pitch Shift> Stereo Delay>Stereo Reverb> Helix Main 1/4" left and Right Output (Left and Right "Wet" sound). Also would all cables, other than speaker cables, be 1/4" TS to 1/4" TS?