grenz_de

Thank you for your help ! This is working, but only within one setlist. When I change the setlist on the HD500, it sends the same midi program change message to the Strymon pedal for the corresponding presets from the other setlists, so this works only within one setlist. This is all quite complicated, when you rearrange your presets on the HD500 for a gig. Hope this will be fixed from Line6 with a firmware update.

Thank you for your reply. Does this mean, that there is no Midi configuration in the HD500 preset with HD500 Edit neccessary, I just look, which preset on the Timeline is active, when I select my preset on the HD500 and I have to use the Timeline preset for the corresponding preset for this song ? And when I put this preset on a different position of the HD500 setlist, I have to do this exercise again and adjust the preset on the Timeline again ? Thank you.

I need your help please. I have got a HD500 and I want to send Midi Program Changes to the Strymon Timeline, which I have in the FX Loop. So I created a preset on the HD500 with the FX Loop on and also the delay preset on the Timeline. In the control section of the HD500 Edit I set the following values: Footswitch FS5 (here is the right preset on the HD500) Midi Channel 1 (same on Timeline), Message Prog Change, Program 23. The Timeline has 200 Presets, the selected preset is on prog 23, with the HD500 I can control 128 presets via Midi. I have connected the Midi Out of the HD with the Midi In of the Strymon. When I change the presets on the HD, it changes also the presets on the Strymon, but not the correct ones. It also changes presets, even I have not configured the Midi controls in the HD preset. And not matter what program or bank I set in the Midi controls of the HD (e.g. 24,25,26...) it always changes to the same (wrong) preset. What is wrong here?

Hello, I own a HD500 and I have found some great patches on Line6 Customtone. The problem is, that some of the patches are very loud compared to my own designed patches. I have a VOX AC30 Amp connected. This tube amp need a bit of volume for a good sound, I have the volume poti 30-40% opened. The problem is, when I reduce the volume in the customtone patch, the patch sounds no longer good. I have tried to reduce the volume in the FX Section in the Distrotion volume, in the Amp Section in the Amp Master and Channel Volume, in the Mixer Section the Main Mix Volume...no metter where I reduce the volume, the sound looses its power and distortion. Thank you for help !