Search the Community
Showing results for tags 'toneportux1'.
Hello, Long story short, I used to play guitar few years before and I remember using GearBox with a TonePort UX1. I don't have it anymore, but I remember how good was GearBox Preset and how it could be possible to modify. I tried Amplitube 5 but it's so expensive and too many features are locked. Do you guy have alternative from Line6 to GearBox ? And Also an Alternative to TonePort UX1 ? Thank you so much !
Hello Line 6 Community. Been using Line 6 products for more than 10 years now, but always for live sound. I just started my home studio and decided to go simple first, so I already had a Line 6 TonePort UX1 and I decided to use it as my soundcard/table. I play guitar and always used my toneport with programs like gearbox, guitar rig and amplitube. It always worked well, but I've never tried XLR input of my toneport since I never wanted to record voice. Then I bought a mic. Without knowing what "phantom power" and "condenser" mics really meant, I fell for a Behringer B-1 mic. For in case you guys don't know, it's a XLR condenser mic (which needs 48v power to work). So I turned it on my toneport and the expected happened: "No sound". Then I searched in the internet for the cause and it led me to "Phantom Power boxes". I bought one of these little boxes that apparently have a XLR input, a XLR output and a Phantom Power switch. I rigged everything to my toneport. When the phantom power switch of the box is off, the green light saying 12v appears. In that case, the microphone works but with a very low audio gain. Ridiculously low, srsly. When I turn the Phantom Power on, the red led says 48v and then... for my surprise... it doesn't work at all. The toneport doesn't get any sound. Then I thought that it makes sense, "How does the toneport will receive a 48v signal by being only connected in a USB input?". I guess the guy who said to buy a phantom power box thought that the toneport ux1 was connected to another source of energy, not only USB. My question is: Do I have to upgrade to Toneport UX2 or other newer version which doesn't rely only in usb as a power source so I can use my 48V mic? Or it should have worked 48v in my toneport? I'm lost now, since the internet says one thing and I've tried and didn't get results... Thanks in advance and have a nice day, guys.