bjoernm Posted November 17, 2014 Share Posted November 17, 2014 Hi there, I am trying for quite a long time now getting the desired tone quality out of my equipment. The problem is: playing my JTV 89f the patches on the POD sound pretty good via headphones or via pa (xlr left right). But connected to L6 Link even with the suggested 110 ohm cable it does not. Any ideas for possible reasons? I really do want to use the L6 Link cause the left and right xlr out is designated for conneting to the PA system (using the Lt3 as Monitor). Thanx, Björn Quote Link to comment Share on other sites More sharing options...
silverhead Posted November 17, 2014 Share Posted November 17, 2014 Make sure your L3t is set to PA/Reference mode, and your HD500X to Studio output mode. Note that the HD500X stores the L3t mode as part of each preset. Unfortunately, the default value seems to be Electric Guitar. After selecting each preset, check the L3t mode. If necessary, manually reset the mode to PA/Reference and then SAVE the preset on the HD500. You will have to do this once for each preset; it will be recalled with the correct speaker mode in the future. 1 Quote Link to comment Share on other sites More sharing options...
vansjlo Posted November 18, 2014 Share Posted November 18, 2014 hello all how I can turn the small speaker system line6 logo StageSource Quote Link to comment Share on other sites More sharing options...
bjoernm Posted November 18, 2014 Author Share Posted November 18, 2014 Hello silverhead, Thank you for your answer. The part with the Lt3 modes I checked allready. Unfortunately not with the looked-for result. What means that even when I set the two devices in the modes you mentioned the sound via L6 Link is clearely different to the other outputs. greetings from good old Germany, Björn Quote Link to comment Share on other sites More sharing options...
Leitz Posted December 12, 2014 Share Posted December 12, 2014 Make sure your L3t is set to PA/Reference mode, and your HD500X to Studio output mode. Note that the HD500X stores the L3t mode as part of each preset. Unfortunately, the default value seems to be Electric Guitar. After selecting each preset, check the L3t mode. If necessary, manually reset the mode to PA/Reference and then SAVE the preset on the HD500. You will have to do this once for each preset; it will be recalled with the correct speaker mode in the future. is there an option in the windows gui to change this ? or do i have to make changes directly on the hd500x? Quote Link to comment Share on other sites More sharing options...
silverhead Posted December 12, 2014 Share Posted December 12, 2014 You have to manually change the speaker mode on the L3 and then SAVE the HD500 preset. There is no visible acces to the speaker mode setting on the Hd500 itself nor in Hd500 Edit. The speaker mode is stored somewhere/how in the device but it is not accessible. Quote Link to comment Share on other sites More sharing options...
Leitz Posted December 14, 2014 Share Posted December 14, 2014 ty for the reply Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.