teovai Posted April 3, 2015 Share Posted April 3, 2015 IS it possible for you to connect the pod hd 500 only on the 'return' and 'out' jacks only, to get only ambient effects from the POD? Only to do not convert from Analog to Digital 4 times the tube amp signal (like the 4 cable method does)? Like this: (FX LOOP set to ON in the POD) guitar -> tube amplifier IN -> tube amplifier SEND -> POD RETURN -> [ ambient effects ] -> POD OUT -> tube amplifier RETURN thank you! Quote Link to comment Share on other sites More sharing options...
NucleusX Posted April 3, 2015 Share Posted April 3, 2015 I think this is do-able, you can't do any damage. Obviously you would want the FX Loop block in the POD right at the beginning of the chain. Not sure wether the POD's send volume will have any effect.Try it :) Quote Link to comment Share on other sites More sharing options...
LF1080 Posted April 3, 2015 Share Posted April 3, 2015 Don't use the FX loop on the pod. Have the FX send on your amp go to the guitar in on the pod. Then have the 1/4" out on the pod go to the FX return on your amp. There is no need to create an FX loop block in the pod. guitar -> tube amp Input -> tube amp FX SEND -> POD guitar in -> [ ambient effects ] -> POD 1/4" OUT (L or R) -> tube amp FX Return Obviously, make sure you have an empty amp block. This is definitely the easiest way to do it . I do it all the time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.